Sorry - there is a problem with the database. We're in the process of rectifying the problem....
    DATA SHEET
    Document Number:
    Package Title:
    Equipment Number:
      Equipment Name  
    # Duty Description Detail   Rev
    1.1 Process Description
    1.2 Duty
    1.3 Design Life
    1.4 Location
    1.5 Feed Conditions      
    1.5.1 Feed description
    1.5.2 Solids feed rate, (Nominal) tph
    1.5.3 Approximate Feed Particle Size (F80) µm
    1.5.4 Solids SG (Nominal) SG
    1.5.5 Liquid SG (Nominal) SG
    1.5.6 Slurry Density, (% solids w/w%) (Nominal) %
    1.5.7 Slurry SG SG
    1.5.6 Slurry flow rate, Nominal m3/hr
    1.5.7 Slurry pH pH
    1.5.8 Dynamic Viscosity Ƭ (Pa.s)
    1.5.9 Abrasion Index (Nominal)
    1.5.10 Abrasion Index (Range)
    1.5.11 Temperature (deg.c) oC
    1.6 Pipline      
    1.6.1 Pipe Length m
    1.6.2 Suction Head m
    1.6.3 Static head m
    1.6.4 Discharge Pressure kPa
    1.6.5 Valves and Fittings
    1.7 Pipe Material      
    1.7.1 Pipe Material
    1.7.2 Pipe Class (Steel=Sch / HDPE= SDR)
    1.7.3
    1.7.4 Pipe Lined (Lookup table for pipe roughness)
    1.7.5 Pipe Roughness (see above selection) Tm
    1.7.6 Pipe Size DN
    1.7.7 Pipe OD mm
    1.7.8 Pipe Wall Thickness mm
    1.7.9 Est. Pipe ID - need to cross check HDPE IDs mm
    1.7.10 Pipe ID mm
    1.7.11 Velocity in Pipe m/s
    1.8 Pipe Head Loss      
    1.8.1 Fluid velocity m/s
    1.8.2 Reynolds Number Re
    1.8.3 Roughness ratio e/D
    1.8.4 Churchill friction factor f
    1.8.5 Total head loss m
    1.8.6 Total head added by pump m
    1.9 Total Head Loss / Estimated Power      
    1.9.3 Hydraulic Power kW
    1.9.4 Estimated Pump Efficiency %
    1.9.5 Estimated Pump Power kW
    1.10 NPSHA      
    1.10.1 Pressure on tank / hopper / dam surface kPa
    1.10.2 Suction Head (negative for lift) m
    1.10.3 Suction Head Loss due to pipe, bends etc. m
    1.10.4 Fluid Vapour Pressure @ 20 deg.C kPa
    1.10.5 NSPHA m
    # Equipment Detail Units Supplier Detail Rev.
    2.1 Name of Supplier:  
    2.2 Date Questionnaire Filled Out:
    3 General: Units
    3.1 Manufacturer -
    3.2 Model Number -
    3.3 Size
    4 Pump Design: -
    4.1 Pump Type -
    4.2 Impeller
    4.2.1 Type & No. of Vanes -
    4.2.2 Pump Curve Number -
    4.2.3 Diameter mm
    4.2.4 Tip Speed at Normal Flow m/s
    4.2.5 Tip Speed at Design Flow m/s
    4.2.6 Max. Passing Particle Size mm
    4.3 Pump Performance
    4.3.1 Head Ratio (Hr) -
    4.3.2 Efficiency Ratio (Er) -
    4.3.3 Speed @ Design Flow rpm
    4.3.4 Speed @ Normal Flow rpm
    4.3.5 Speed @ Minimum Flow rpm
    4.3.6 Efficiency at Design Flow %
    4.3.7 Efficiency at Normal Flow %
    4.3.8 Efficiency at Minimum Flow %
    4.3.9 Power @ Design Flow kW
    4.3.10 Power @ Normal Flow kW
    4.3.11 Power @ Minimum Flow kW
    4.3.12 NPSH @ Design pump speed m
    4.3.13 NPSH @ Normal Flow m
    4.3.14 Shut Off Head @ Design Pump Speed m
    4.3.15 Shut Off Head @ Max Pump Speed m
    4.3.16 Pump Maximum Discharge Pressure (See Note 1) kPag
    4.3.17 Max Casing Design Pressure kPa
    4.3.18 Max Casing Temperature 0C
    4.4 Pump Shaft
    4.4.1 Stiffness Ratio (L3/D4)
    4.4.2 Maximum Deflection at Seal Area (Radial) mm
    4.4.3 Maximum Movement (Axial) mm
    4.4.4 Bearing Lubrication
    4.4.5 Bearing Seal Arrangement
    4.4.6 L10 Brg Life at Motor Full Load
    4.4.7 Critical Speed rpm
    5 Materials of Construction:
    5.1 Bowl -
    5.2 Bowl Liner -
    5.3 Shaft -
    5.4 Shaft Sleeve -
    5.5 Impeller -
    5.6 Impeller Coating -
    5.7 Pump Barrel -
    5.8 Base Frame -
    5.9 Drive Guard -
    5.10 Seal Area Shroud -
    6 Shaft Seal
    6.1 Type -
    6.2 Manufacturer -
    6.3 Model
    6.4 Flushing Fluid Required Yes/No
    6.5 Flushing Fluid Flow l/min
    6.6 Flushing Fluid Pressure kPag g
    6.7 Seal Water Flow Restrictor Model No.
    6.8 Gland Packing
    6.9 Materials of Construction
    7 Pump Connections
    7.1 Suction Size DN
    7.2 Suction Flange Standard -
    7.3 Discharge Size DN
    7.4 Discharge Flange Standards -
    8 Motor
    8.1 Manufacturer -
    8.2 Frame Size -
    8.3 Speed at Rated Output rpm
    8.4 Rated Current A
    8.5 Rated Output kW
    8.6 Rated Voltage V
    9 Noise Levels
    9.1 Noise Measured at 1 meter dB(A)
    9.2 Standard Applicable to noise measurement -
    10 Drive Arrangement
    10.1 Coupling
    10.1.1 Manufacturer/ Type/ Model
    10.1.2 Torque Rating kN.m
    10.1.3 Method of Attachment
    10.2 V Belt Drive
    10.2.1 Belt Manufacturer
    10.2.2 Belt Section / No. Off
    10.2.3 Speed Ratio/ Driver Dia./ Driven Pulley Dia. mm
    11 Painting and Surface Protection -
    11.1 Pump Assembly and Appurtenances -
    12 Masses:
    12.1 Mass of Heaviest Maintenance Item kg
    12.2 Pump Assembly kg
    12.3 Motor kg
    12.4 Vee Pulleys and Belts kg
    12.5 Drive Guard kg
    12.6 Base Frame kg
    12.7 Total Operating Mass kg
    12.8 Total Shipping Mass kg
    Notes
     
       
    Powered By Freight Metrics